Home / Manual finder
HVAC manual finder
Type the model number from the data plate. You get the manufacturer's installation or service manual for that series, and our code chart built from it.
We link to each document where it is published; we don't host copies. Some links go to the manufacturer and some to a distributor or manual library that carries the manufacturer's document, and the link says which site it opens. Manuals are revised, so check that the form number matches the unit in front of you. 70 series so far, the same ones our code charts cover, and more are added as charts are added.
ACiQ
- Single-zone wall mount, R-454B (mini-split): ACiQ Single-Zone Service Manual (6K–24K, R-454B), Error code of engineer mode, pp. TS 11–12 (hvacdirect.com). Code chart
Carrier
- 25HNA6 / 25HNA9 (heat pump): Carrier 25HNA Infinity Series Heat Pump Installation Instructions, 25HNA-5SI, Table 6 Troubleshooting, p. 14 (shareddocs.com). Code chart
- 25HNB6 / 25HNB9 (heat pump): Carrier 25HNB6 / 25HNB9 Infinity 2-Stage Heat Pump Installation Instructions, 25HNB6-9-4SI, Table 6 Troubleshooting, p. 13 (shareddocs.com). Code chart
- 48FE IGC Board (furnace): Carrier 48FE 20-30 Service and Maintenance Instructions, 48FE-20-30-02SM, Table 11 (IGC Board LED Alarm Codes), page 49 (shareddocs.com). Code chart
- 48HC / 50HC 04-28 ComfortLink Controller Version 2.X (furnace): Carrier 48/50HC 04-28 with ComfortLink Controls Version 2.X, Controls, Start-Up, Operation and Troubleshooting (48-50HC-C04T, edition 05/14), Alarms and Alerts pp. 34-38 and Table 9 ComfortLink Alarm Codes pp. 39-40 (shareddocs.com). Code chart
- 48LC / 50LC 04-06 ComfortLink Controller Version 1.X (furnace): Carrier 48/50LC 04-06 with ComfortLink Controls Version 1.X, Controls, Start-Up, Operation and Troubleshooting (48-50LC-C01T), Alarms and Alerts pp. 26-29 and Table 6 ComfortLink Alarm Codes p. 30 (shareddocs.com). Code chart
- 48LC / 50LC SystemVu Controller Version 4.X (furnace): Carrier 48/50LC 04-26 with SystemVu Controls Version 4.X, Controls, Start-Up, Operation, and Troubleshooting, S-VU-LC-4-26-03T (2-2020), Faults and Alerts pp. 33-37 and Table 19 pp. 38-40 (shareddocs.com). Code chart
- 48PG / 50PG 03-14 and 48PM / 50PM 16-28 ComfortLink Controller Version 5.X (furnace): Carrier 48/50PG C03-14 and 48/50PM C16-28 with ComfortLink Controls Version 5.x, Controls, Start-Up, Operation, Service and Troubleshooting Instructions (48-50PGPM-03T, edition 1/11), alert descriptions pp. 38-40 and 43, Table 12 ComfortLink Alarm Codes pp. 41-42 (manualsdir.com). Code chart
- 58CTA / 58CTX (furnace): Carrier 58CTA/CTX Series 140/E Installation, Start-up, Operating and Service and Maintenance Instructions, Form 58CT-12SI, Fig. 51 Service Label (327598-101 Rev. C), p. 45, and code recall, p. 44 (hvac.com). Code chart
- 58CVA / 58CVX (furnace): Carrier 58CVA/58CVX Troubleshooting Guide, 58-5T (Catalog 535-80107) (shareddocs.com). Code chart
- 58SB0A / 58SB1A (furnace): Carrier 58SB0A/58SB1A Installation, Start-Up, Operating and Service and Maintenance Instructions, Fig. 51 Troubleshooting Guide (p. 38) (shareddocs.com). Code chart
- 58STA / 58STX (furnace): Carrier 58STA/58STX Installation, Start-up, Operating and Service and Maintenance Instructions, Form 58ST-24SI, Fig. 45 Service Label (327596-101 Rev. B), p. 43 (shareddocs.com). Code chart
- 59TP6C two-stage condensing with InteliSense (furnace): Carrier 59TP6C Installation, Start-up, Operating and Service Instructions (59TP6C-03SI), Fig. 60 Service Label status code table and Table 21 (shareddocs.com). Code chart
Daikin
- FTX / FVXS / FDMQ with RXL outdoor (mini-split): Daikin Service Manual SiUS091601ED (FTX/FVXS/FDMQ with RXL), Error Codes and Description (daikincomfort.com). Code chart
Fujitsu
- Halcyon / Airstage splits (mini-split): Fujitsu General (UK) Fault Codes reference (webstore.uk.fujitsu-general.com). Code chart
Goodman / Amana
- AVXC20 / GVXC20 (air conditioner): Amana AVXC20 Air Conditioner Installation & Service Reference, Troubleshooting, pp. 26-29 (resource.ecmdi.com). Code chart
- AVZC18 (heat pump): Amana AVZC18 Heat Pump Installation & Service Reference, IOA-4016B, Troubleshooting, pp. 30-33 (resource.ecmdi.com). Code chart
- AVZC20 (heat pump): Amana AVZC20 Heat Pump Installation & Service Reference, Troubleshooting, pp. 33-36 (resource.ecmdi.com). Code chart
- GMVC96 / GCVC96 (furnace): Goodman Installation Instructions for *CVC96*BA and *MVC96*BA two-stage gas furnaces, IOG-2015A (5/2018), Status Codes and Troubleshooting Chart, pp. 44-48 (cdn.shopify.com). Code chart
- GMVM96 / GCVM96 / AMVM96 / ACVM96 (furnace): Goodman Installation Instructions for *MVM96 and *CVM96 modulating gas furnaces, IO-406E (5/13), Troubleshooting Codes and Status Codes, pp. 52-57 (resource.ecmdi.com). Code chart
- GMVS96 / AMVS96 U-revision (furnace): Goodman Service Instructions, GMVS96*U and AMVS96*U gas furnaces, Troubleshooting chart, pp. 34-39 (cdn.shopify.com). Code chart
- GR9S80 / GD9S80 (furnace): Goodman Service and Troubleshooting, 80% Single Stage Gas Furnaces, RS6621301 (11/2023) (mobile.goodmanmfg.com). Code chart
- GSZC18 (heat pump): Goodman Condensing Unit / Heat Pump Installation & Service Reference (GSZC18 copy), Troubleshooting Information: Unitary Diagnostic Codes, pp. 14-19 (cdn.shopify.com). Code chart
Goodman / Amana / Daikin
- GM9S96 / GC9S96 / GM9S92 (furnace): Goodman Service and Troubleshooting RS6612022R1 (GM9S92/GM9S96/GC9S96), 1 Stage Troubleshooting Codes, pp. 29–30 (mobile.goodmanmfg.com). Code chart
Gree
- Livo / All-Match with LIV outdoor (mini-split): Gree All-Match Floor Standing R32 Service Manual (LIV outdoor), 9.1 Error Code List (greecomfort.com). Code chart
ICP (Heil, Tempstar, Comfortmaker, Arcoaire)
- N80ESU / R80ESU (furnace): ICP N80ESU Installation, Start-up, Operating and Service and Maintenance Instructions, 441 01 1501 04 (edition 04/21), Service Guide, p. 33 (shareddocs.com). Code chart
- N80MSU (furnace): ICP N80MSU Installation, Start-up, Operating and Service and Maintenance Instructions, N80MSU-03SI: Table 11 p. 22, Fig. 35 Service Label p. 24 (shareddocs.com). Code chart
- N8MSN / N8MSL (furnace): ICP N8MSN/N8MSL Installation Instructions, 441 01 1402 03 (March 2013), Figure 44 Service Label, p. 38 (shareddocs.com). Code chart
- N9MSE (furnace): ICP N9MSE Service and Technical Support Manual, 440 04 4402 07 (10/15/2018), Figure 14 Service Label, p. 24 (shareddocs.com). Code chart
Klimaire
- KSIE inverter wall mount (mini-split): Klimaire KSIE troubleshooting guide (2016), 9.1 Indoor Unit Error Display (manualmachine.com). Code chart
Lennox
- Energence / Strategos Prodigy 2.0 M3 Unit Controller (furnace): Lennox Prodigy 2.0 (M3 Unit Controller) Setup Guide, 507241-07 (5/2022), Table 15, Prodigy 2.0 Alarm and Event Codes, pp. 38-45 (lennox.com). Code chart
- G60DF / G60DFV (furnace): Lennox SureLight Ignition System, Two Stage and Two Stage Variable Speed, Service Literature Corp. 0222-L7 (revised 11-2006), Table 5 (lennox.com). Code chart
- G60UH / G60UHV (furnace): Lennox SureLight Ignition System, Two Stage and Two Stage Variable Speed, Service Literature Corp. 0222-L7 (revised 11-2006), Table 7 (lennox.com). Code chart
- Merit ML180UH (furnace): Lennox ML180UH Installation Instructions, 507323-01 (07/2018), Integrated Control Diagnostic Codes (lennox-commercial-prod.dotcms.cloud). Code chart
- Mini-splits: MLB / MPC / 3PC outdoor with M22A, M33C, MWMC, MCFA/B, MFMA indoor (mini-split): Lennox Mini-Split Systems Service Manual 100030 (4/2022), Indoor and Outdoor Unit Error Codes (lennox.com). Code chart
- SL25XPV (heat pump): Lennox SL25XPV Unit Information, Corp. 100026 (June 1, 2022), Table 6 and Figure 22, pp. 39-44 (lennox.com). Code chart
- SL280UHV (furnace): Lennox SL280UHV Installation Instructions 508245-01 (04/2024), Integrated Control Diagnostic Codes (lennox.com). Code chart
- XP17 (heat pump): Lennox XP17 Installation Instructions, 506586-01, Tables 14 and 15, pp. 40-44 (lennox.com). Code chart
LG
- Single / multi-split wall units (mini-split): LG Canada: Single / Multi-Split Air Conditioner Error Codes; LG US: Air Conditioner Guide to Error Codes (lg.com). Code chart
Midea
- High wall ductless DLFSHB (mini-split): Midea DLFSHB High Wall Ductless Service Manual, Table 9 Error Codes, p. 17 (copy on ManualsLib) (manualslib.com). Code chart
Mitsubishi Electric
- MSZ-GL / MSY-GL (mini-split): Mitsubishi Electric MSZ-GL/MSY-GL Indoor Unit Service Manual OBH732, Indoor unit failure mode table (inspectapedia.com). Code chart
MRCOOL
- DIY E Star 4th Generation (mini-split): MRCOOL DIY E Star 4th Generation Troubleshooting & Solutions Guide (10-22-21) (inspectapedia.com). Code chart
Pioneer
- Diamante / Quantum (mini-split): Pioneer Support: Error Code Table for Diamante & Quantum Series Systems (help.pioneerminisplit.com). Code chart
Rheem / Ruud
- 801S / 801P / 80MSS / 80MSP (furnace): Rheem Installation Instructions, (-)801S / (-)801P / (-)(-)80MSS / (-)(-)80MSP upflow/horizontal single-stage gas furnaces, 92-24161-142-15, Diagnostics and Fault Codes, p. 39 (resource.gemaire.com). Code chart
- 801V Ultra Low NOx (furnace): Rheem Installation Instructions, 80+ communicating upflow/horizontal Ultra Low NOx gas furnaces with constant CFM/PWM blower, 92-24161-184-04, Fault Codes, p. 42 (budgetheating.com). Code chart
- 802P / 80MDP (furnace): Rheem Installation Instructions, (-)802P / (-)(-)80MDP upflow/horizontal two-stage gas furnaces, 92-24161-146-02, Diagnostics and Fault Codes, p. 40 (manualslib.com). Code chart
- 802T / 80MDT (furnace): Rheem Installation Instructions, (-)802T / (-)(-)80MDT upflow/horizontal two-stage gas furnaces, 92-24161-167-00, Diagnostics and Fault Codes, pp. 40-41 (resource.gemaire.com). Code chart
- 802V / 80MDV (furnace): Rheem Installation Instructions, (-)802V / (-)(-)80MDV two-stage communicating gas furnaces, 92-24161-148-04, Tables 12 and 13 (pp. 64-73) (inspectapedia.com). Code chart
- R801T / 80MSX (furnace): Rheem Installation Instructions, (-)801T / (-)(-)80MSX upflow/horizontal single-stage gas furnaces with constant-torque blower, 92-24161-144-01, Diagnostics and Fault Codes, p. 39 (resource.bakerdist.com). Code chart
- R801T Ultra Low NOx (furnace): Rheem Installation Instructions, (-)801T Upflow Series Ultra Low NOx single-stage gas furnaces, 92-24161-164-01, Diagnostics (resource.bakerdist.com). Code chart
- R951T (furnace): Rheem Installation Instructions, 95% 4-position condensing single-stage gas furnaces with constant-torque blower, 92-24161-120-29, Table 17 fault code list, p. 87 (resource.gemaire.com). Code chart
- R96V / 96MDV (furnace): Rheem R96V / 96MDV Installation Instructions, 92-24161-124-08, Table 20 Fault Codes (pts.rheem.com). Code chart
- R97V (furnace): Rheem (-)97V Installation Instructions, 92-24161-151-04, Table 19 Fault Codes, pp. 109-119 (resource.gemaire.com). Code chart
- R98V (furnace): Rheem (-)98V Installation Instructions, 92-24161-159-03, Table 19 Fault Codes, pp. 92-101 (normal operation codes, Table 18, p. 91) (resource.gemaire.com). Code chart
- RA20 (air conditioner): Rheem Variable Speed R-410A Air Conditioning Outdoor Units Installation Instructions (RA20), 92-104921-12 Rev. 00, ICC Diagnostic Codes, pp. 54-57 (resource.gemaire.com). Code chart
- RP20 (heat pump): Rheem Variable Speed R-410A Heat Pump Outdoor Units Installation Instructions (RP20), 92-105074-09-02, ICC Diagnostic Codes, pp. 57-60 (resource.gemaire.com). Code chart
- W801T (furnace): Rheem Select Installation Instructions for 80% downflow single-stage gas furnaces (W801T), Diagnostics and Fault Codes, p. 35 (resource.gemaire.com). Code chart
Senville
- AURA / LETO (mini-split): Senville AURA Series Error Code Reference Guide (Senville support) (help.senville.com). Code chart
Trane
- 5TWR4 (heat pump): Trane Heat Pumps 5TWR4 Installation, Operation, and Maintenance, ODR-SVX004D-EN (April 2026), Tables 14-17 and notes, pp. 25-26 (elibrary.tranetechnologies.com). Code chart
- Precedent ReliaTel Direct Spark Ignition Module (furnace): Trane RT-SVD03N-EN, ReliaTel Microprocessor Controls Service and Diagnostic Support Manual (August 2022), Table 97 (p. 134) and RTRM diagnostics (pp. 34-36) (support.trane.com). Code chart
- Voyager ReliaTel Hot Surface Ignition Control (furnace): Trane RT-SVD03N-EN, ReliaTel Microprocessor Controls Service and Diagnostic Support Manual (August 2022), Tables 99 and 100 and Ignition Control Module Diagnostics, p. 138 (support.trane.com). Code chart
Trane / American Standard
- A801X (furnace): Trane Installation, Operation, and Maintenance, A801X single-stage gas furnaces, A801X-SVX001-1D-EN (August 2024), Integrated Furnace Control Display Codes, pp. 48-49 (elibrary.tranetechnologies.com). Code chart
- A801X060AM3S (furnace): Trane Installation Manual, A801X060AM3S*** upflow/horizontal and downflow gas furnaces, 88-A801X004-1B-EN (11/2024), Table 13-1 Troubleshooting Chart (elibrary.tranetechnologies.com). Code chart
- S8B1 / S8X1 / S8X2 (furnace): Trane Installer's Guide, S8B1 / S8X1 / S8X2 gas furnaces, 18-CE16D1-1C-EN (2021), Integrated Furnace Control Display Codes, p. 58 (elibrary.tranetechnologies.com). Code chart
- S9X1 / S9X2 / S9B1 (furnace): Trane S9X1/S9X2/S9B1 Installation, Operation and Maintenance, FNR-SVX002A-EN (02/2026), Table 43 Error Codes and troubleshooting (gotductless.com). Code chart
York
- TG9S (furnace): York TG9S Installation Manual, 1083287-UIM-L-1219, Furnace Control Diagnostics p. 38 and Diagnostic Fault Code Storage and Retrieval p. 39 (master.ca). Code chart
- TI Board (furnace): York Service Tips ST-045-09 (September 2, 2009), Generation Before - TI Boards fault code sheet, p. 7 (upgnet.com). Code chart
- TM9V (furnace): York TM9V Installation Manual, 1083294-UIM-A-0114, Furnace Control Diagnostics pp. 41-42 and Diagnostic Fault Code Storage and Retrieval p. 42 (upgnet.com). Code chart
- UTEC Board (furnace): York Service Tips ST-045-09, UTEC Integrated Furnace Control (IFC) Boards on All Single and Two Stage Gas Furnaces (September 2, 2009), p. 1 and New UTEC IFC Boards fault code sheet, p. 5 (upgnet.com). Code chart
- White-Rodgers Board (furnace): York Service Tips ST-045-09 (September 2, 2009), Last Generation W/R Emerson IFC Boards fault code sheet, p. 6, and p. 1 (upgnet.com). Code chart