Rooftop Units
Economizers, outdoor air, belts and three-phase start-up checks.
Rooftop Unit Economizers: How They Work, Setup and Troubleshooting
How a packaged rooftop unit economizer decides when to use outdoor air, the factory default setpoints on Carrier EconomizerONE and Honeywell JADE W7220 controllers, how to run the built-in checkout tests, what each fault alarm means, and what to check when free cooling isn't working.
Rooftop Unit Start-Up: Three-Phase Voltage, Compressor Rotation and the Checks That Matter
What to check when you start up a packaged rooftop unit - three-phase voltage imbalance (2% limit) and how to calculate it, scroll compressor rotation, the 208-volt transformer tap, condensate trap, gas pressure testing and the readings to record, following Carrier's rooftop unit instructions.
Belt-Drive Blowers: Belt Tension, Pulley Alignment, Bearings and Setting Airflow
How to service a belt-drive blower on older furnaces, air handlers and rooftop units, including belt tension and alignment, bearings, adjustable pulleys and how they change airflow.
Tools, charts and checklists
- Rooftop unit and economizer practice test
- Rooftop unit maintenance checklist
- Three-phase voltage imbalance calculator
- Carrier 48FE rooftop gas heat (IGC) codes
- Trane Precedent ReliaTel ignition codes
- Trane Voyager ReliaTel ignition codes
- Lennox Prodigy M3 alarm codes
- Carrier SystemVu (48/50LC) alarm codes
- Carrier ComfortLink (48/50LC 04-06) alarm codes
- Carrier ComfortLink (48/50HC 04-28) alarm codes
- Carrier ComfortLink (48/50PG and PM) alarm codes