Light Commercial
Packaged rooftop units and walk-in refrigeration: economizers, three-phase power, defrost and superheat.
Rooftop Unit Economizers: How They Work, Setup and Troubleshooting
How a packaged rooftop unit economizer decides when to use outdoor air, the factory default setpoints on Carrier EconomizerONE and Honeywell JADE W7220 controllers, how to run the built-in checkout tests, what each fault alarm means, and what to check when free cooling isn't working.
Rooftop Unit Start-Up: Three-Phase Voltage, Compressor Rotation and the Checks That Matter
What to check when you start up a packaged rooftop unit - three-phase voltage imbalance (2% limit) and how to calculate it, scroll compressor rotation, the 208-volt transformer tap, condensate trap, gas pressure testing and the readings to record, following Carrier's rooftop unit instructions.
Belt-Drive Blowers: Belt Tension, Pulley Alignment, Bearings and Setting Airflow
How to service a belt-drive blower on older furnaces, air handlers and rooftop units, including belt tension and alignment, bearings, adjustable pulleys and how they change airflow.
Commercial Ice Machine Troubleshooting: Hoshizaki Beep Codes and Manitowoc Indigo NXT
What Hoshizaki KM alarm beeps and blinking LEDs mean, how to read the green LED sequence, the no-ice and freeze-up checklists, and Manitowoc Indigo NXT service faults, harvest problems and ice thickness adjustment, from the manufacturers' service manuals.
Hot Gas Defrost: Three-Pipe, Reverse Cycle and Alternating Systems Explained
How hot gas defrost works on walk-in and warehouse unit coolers, the difference between three-pipe, reverse cycle (two-pipe), alternating evaporator and Thermobank systems, the drain pan loop and check valves, the 25% rule, piping and start-up checks, and what to look at when the coil won't clear, following Heatcraft and HTPG unit cooler manuals.
Reach-In Cooler and Freezer Troubleshooting: Warm Box, Defrost and Dirty Condensers
How a self-contained reach-in refrigerator or freezer runs and defrosts, why the display can read warm when the product is fine, the location and power rules that cause most warm-box calls, how to clean the condenser, and the R-290 precautions, following True Manufacturing's installation manual.
Walk-In Condensing Units: Preventive Maintenance and Cold-Weather Problems
The quarterly, semi-annual and annual maintenance Heatcraft lists for air-cooled walk-in condensing units, what to check when a unit short cycles or won't hold head pressure in cold weather, pressure fan cycling settings, and the extra rules for A2L condensing units.
Walk-In Cooler and Freezer Troubleshooting: Defrost, Superheat and Iced Coils
How a walk-in cooler or freezer runs and defrosts, the superheat targets at the evaporator and the compressor, how to set the defrost fail-safe, drain line rules for freezers, and what to check for a warm box, an iced coil, ice on the ceiling or a frozen drain pan, following Heatcraft's unit cooler and condensing unit manuals.