HVAC electrical practice test
32 questions. Capacitors, contactors, compressor winding tests, PSC and ECM motors, and diagnosing units that won't start. Practice with every answer explained, or take a 25-question exam. Each answer names its source and links to the guide that teaches it.
32 questions in this set.
What it covers
| Capacitors (6) | Testing under load and with a meter, tolerance, replacement ratings, discharging. |
| Contactors (5) | Coil voltage and resistance, contact voltage drop, replacement ratings. |
| Compressors (8) | Winding resistance, ground faults, overloads, three-phase checks and start assist. |
| Fan and blower motors (8) | PSC, constant-torque and variable-speed ECM motors, testing and replacement. |
| No-start diagnosis (5) | Breakers that trip, humming, clicking and silence. |
Study first
- How to test a run capacitor
- How to test a contactor (Carrier's four steps)
- How to ohm out a compressor, single and three phase
- How to test PSC and ECM blower motors
- AC breaker keeps tripping
- Capacitor check calculator
More practice tests
Gas furnace and heating controls
58 questions. How a gas furnace starts, proves flame and protects itself, plus gas pressure, airflow, 24-volt controls and heat pumps.
COOLAC charging and refrigeration
43 questions. Superheat and subcooling, PT charts, TXVs, evacuation, leak finding, A2L refrigerants, brazing and the AIM Act leak rules.
REFRCommercial refrigeration
28 questions. Walk-in superheat and TD, electric and hot gas defrost, condensing unit maintenance, reach-ins and ice machine alarms.
RTURooftop units and economizers
25 questions. Rooftop start-up, voltage imbalance, scroll rotation, economizer changeover and setpoints, economizer alarms and Carrier ComfortLink alerts.
HYDRBoilers and hydronics
23 questions. Zone valves and switching relays, expansion tanks and relief valves, air elimination, circulators and boiler short cycling.
DUCTMini-splits
27 questions. Line set length and added charge, flare torque, triple evacuation, test run, communication faults, thermistors, inverter board safety and cleaning.
EPAEPA 608
Core, Type I, II and III, with study guides for each section.
FAQ
Is this an official NATE, school or certification test?
No. These are original questions written by HVAC Cheat Sheet. Every specific number comes from a manufacturer manual, regulation or trade reference named under the answer, and each question links to the guide that covers it.
Who is it for?
HVAC students, apprentices and newer techs who want to get faster at the electrical side of a no-cool call.
Is it safe to practice these tests on live equipment?
Only with training and the right meter and PPE. Lock out and verify power is off before touching wiring, and discharge capacitors through a resistor.
Does it save my progress?
Your best scores and missed questions are saved in your browser on this device. Nothing is sent to us, and there's no signup.
One field tip a week
A short, practical HVAC tip in your inbox every week: diagnostics, charging, airflow and code changes. Free, unsubscribe anytime.
We'll only use your email for the newsletter. Privacy policy.
Original practice questions by HVAC Cheat Sheet, written from the documents named under each answer. Not affiliated with NATE or any school or testing organization. Found an error or want a topic added? Tell us.